- Address: 2535 Lesperance Road
Tecumseh, ON N8N 2X1 - Tel: (519) 258-4166 / (1-888) 735-2155
- Fax: (519) 735-2155
- Email: csi@clarkesurveyors.com
Top of Footing Certificates
To insure that final grading of the lot is in compliance with the grading plan as approved. The Top of Footing elevations shall be certified by a licensed land surveyor. This certification must be submitted to the city prior Pour of concrete footings. If a deviation from the plan is indicated, the City Engineering Department shall review the situation and determine what remedy needs to be pursued.
Top of Footing & Setback Certificates
To insure that final grading and Set Backs are in compliance with the grading plan and site plans approved. The Top of Footing elevations and set back to proposed foundation wall shall be certified by a licensed land surveyor. This certification must be submitted to the city prior Pour of concrete footings. If a deviation from the plan is indicated, the City Engineering Department shall review the situation and determine what remedy needs to be pursued
Final Grade Certificates
To insure that final grading of the lot is in compliance with the grading plan as approved as part of the storm water Management Plan, lot corner elevations shall be certified by a licensed land surveyor. This certification must be submitted to the city prior to the issuance of the Certificate of Occupancy. If a deviation from the plan is indicated, the City Engineering Department shall review the situation and determine what remedy needs to be pursued.
Right of Way Surveys (ROW) Easements Surveys
ROW & Route Surveys are performed for the acquisition of right-of-ways or easements
When the alignment has been determined and width of the easement or right-of-way is finalized, Clarke Surveyors will prepare an easement plan that is deposited in the Land Registry Office as a Reference Plan.
Boma Standard – Leasing Area
For almost 100 years, Building Owners & Managers Association (BOMA) International has set the standard for measuring buildings. In 1915, BOMA first published the Standard Method of Floor Measurement for Office Buildings, an accepted and approved methodology by the American National Standards Institute. Throughout the years, the standard has been revised to reflect the changing needs of the real estate market and the evolution of office building design. Today, BOMA International is the secretariat of a suite of measurement standards.
- Office Buildings: Standard Methods of Measurement (ANSI/BOMA Z65.1 – 2010)
- Standard Method of Measuring Floor Area in Office Buildings (BOMA Z65.1 - 1996)
- Gross Areas of a Building: Standard Methods of Measurement (ANSI/BOMA Z65.3 – 2009)
- Industrial Buildings: Standard Methods of Measurement (ANSI/BOMA Z65.2–2009)
- Multi-Unit Residential Buildings: Standard Methods of Measurement (ANSI/BOMA Z65.4-2010)
- Retail Buildings: Standard Methods of Measurement E-Book (ANSI/BOMA Z65.5-2010)
- Unified Approach for Measuring Office Space: For Use in Facility and Property Management
Taken from www.boma.org